How to setup static PAT (port forwarding) on a Cisco ASA 5505 8.2

If you are going to forward multiple ports, setup an object-group similar to the following:

object-group service DVR tcp
port-object eq 10554
port-object eq 8000
port-object eq 81

Then add your access-list:

access-list outside_access_in extended permit tcp any interface outside object-group DVR

Then add your static PAT statements for the services in your object-group:

static (inside,outside) tcp interface 8000 192.168.5.202 8000 netmask 255.255.255.255
static (inside,outside) tcp interface 10554 192.168.5.202 10554 netmask 255.255.255.255
static (inside,outside) tcp interface 81 192.168.5.202 81 netmask 255.255.255.255

Then add your access-group statement:

access-group outside_access_in in interface outside